Plumb bob Construction WITHOUT nut. Brass. XX Century

Description:
- Incomplete plumb bob Construction of the first half of the 20th century, with a brass weight, and without conserving the nut.
- The body of the weight is cylindrical and conical, 15.5 cm high and 3.8 cm in diameter, with a threaded head.
- Along the body it has several deep channels, achieving a harmonious overall effect.
- It has a very good and beautiful patina throughout the plumb bob line. The quality of the brass casting and the execution of the plumb bob is good.
- No distinctive mark or contrast has been found, which could provide information about the place where it was manufactured, information about the manufacturer, as well as other data.
- Probably the Plumb bob is made in Southern Europe.

Conservation and damage:
- The Plumb bob is in good state of conservation, having many, but very small blows and rubs.
- It has an important blow on one of the faces of the body of the weight.
- The Plumb bob presents the typical wear of its time.

Comments:
- Both the measurements and the weight are approximate.
- Very interesting as a collector- Because it is inevitable the differences of tonalities between photos and reality, it is necessary to bear in mind that the tones of the colours of the photos are not exactly equal to the tones of the real colours.
- The Plumb bob on sale is the one corresponding to the photos, which in turn are complemented in this Description, with the aim of providing a better knowledge of the Object, and never being a detailed exhibition of it.
- The data provided here are not contrasted personal opinions.
DELIVERIES ARE MADE ON MONDAYS.